
Pillow bag
80–300 mm wide
The standard TWIN C format.
This video is hosted on YouTube (Google). If you play it here, YouTube may store cookies and data in your browser for statistics and advertising.
The TWIN C vertical packaging machine is the continuous-motion version of the TWIN: two forming tubes on one frame that work without stopping the film and reach up to 240 bags per minute. It avoids installing two packaging lines and saves floor space without reducing speed, using a single film reel that the machine slits into two films, one for each tube.

The sealing jaws seal on the move on both tubes at once, with vacuum film drive. The result is up to 240 bags per minute in the footprint of a single machine.
A single film reel with a slitting system built into the machine that forms two independent films, one for each forming tube.
LENZE PLC and Lenze servo motors for vertical sealing, jaw up-and-down travel, pull-down belts and horizontal sealing.
Two 10" HD touch screens, 99 recipes and programs, speed set in bags per minute and electronic cam programming, easy for the operator.
Powder, solids or liquids, in pillow bags, flat-bottom bags and strips of bags.
Made-to-measure forming tube changed without tools, expanding shaft on the reel holder and semi-automatic film splicing.

80–300 mm wide
The standard TWIN C format.

A bag that stands upright on the shelf.

Bags joined in a strip, without cutting between them.
A single film reel on the reel holder with expanding shaft; the built-in slitting system divides it into two films, one for each tube. End-of-reel detection and early warning, and semi-automatic splicing.
Two forming tubes made to the size of your bag. The vacuum belts pull each film continuously, with film correction from the screen.
Each tube receives product from its own dosing unit: multihead weigher, auger filler, piston filler or volumetric cup filler.
Servo vertical sealing and horizontal jaws with an up-and-down servo that seal on the move, with PID temperature control and cooling air.
Cut by length or by eye mark, read by the SICK KT5 colour photocell.
The finished bags leave on the conveyor; the counter records full and empty bags and the large rear area takes a printer or labeller.
| TWIN C 420 | TWIN C 620 | |
|---|---|---|
| Bag width | 80–200 mm | 80–300 mm |
| Film width | 180–420 mm | 180–620 mm |
| Bag types | Pillow and flat-bottom | Pillow and flat-bottom |
| Max. speed | up to 240 bags/min | up to 240 bags/min |
| Drive | Servo / pneumatic | Servo / pneumatic |
| Machine type | Continuous | Continuous |
| No. of recipes | 99 | 99 |
| Eye mark photocell | Yes | Yes |
| Control | Lenze | Lenze |
| Formats | Pillow bag, flat-bottom bag, strip of bags |
|---|---|
| Bag dimensions | Length 80–360 mm · width 80–295 mm |
| Maximum film width | 620 mm, single film reel slit into two films |
| Film thickness | 0.09–0.4 mm |
| Cutting | By length and/or by eye mark |
| Power supply | 400 V 50/60 Hz |
|---|---|
| Total power | 12.5 kW |
| Compressed air | 7 bar · 450 l/min, with air receiver |
| PLC | LENZE with motion control system |
|---|---|
| Screen | Two 10" HD touch screens |
| Memory | 99 recipes and programs, two password-protected access levels |
| Safety | Rockwell module with micro switches on all doors and openings, CE regulations |
| Push buttons | MOELLER |
| Film drive | Continuous vacuum traction (Becker pump) · 0.75 kW LENZE servo |
|---|---|
| Vertical sealing | 0.35 kW LENZE servo |
| Sealing jaws (up/down) | 2.2 kW LENZE servo |
| Horizontal sealing | 1.1 kW LENZE servo |
| Eye mark reading | SICK KT5 colour photocell |
| Pneumatics | FESTO / SMC, with pressure-control switch |
| Maintenance | Centralised lubrication and deflating sponges |
2725 mm
2230 mmThe machine integrates with the rest of the line: dosing, quality control and end of line.
Up to 240 bags per minute across both tubes, depending on the product and pack size.
The TWIN is intermittent, up to 140 bags per minute, with one film reel per tube. The TWIN C runs in continuous motion with Lenze servos, vacuum film drive and a single film reel slit into two films, and reaches 240.
The machine has a built-in slitting system that divides the reel into two independent films, one for each forming tube. So only one reel needs to be loaded and spliced.
The film and bag width. The TWIN C 420 handles films from 180 to 420 mm for bags from 80 to 200 mm; the TWIN C 620, films from 180 to 620 mm for bags from 80 to 300 mm.
Pillow bags, flat-bottom bags and strips of bags, with lengths from 80 to 360 mm and film from 0.09 to 0.4 mm.
A 400 V 50/60 Hz power supply with 12.5 kW of power and compressed air at 7 bar with a consumption of 450 l/min.
Tell us what you pack, in which format and at what speed. An engineer will reply with a proposal.








We reply here from WhatsApp, usually within a few minutes.
Hi! 👋 Tell us what product you need to pack and we'll help you choose the right machine.