
Pillow bag
bag 120–600 × 70–200 mm · product up to 80 mm high (FP600BM)
The flow pack format: one longitudinal seal and two cross seals.
The FPBM Flowpack packaging machine forms a pillow bag from a reel of heat-sealable film and seals it with Box Motion jaws. It is especially suited to products with some height, delicate products or products that need a hermetic seal, such as burger buns or pizzas. The FP600BM runs reels up to 600 mm, bags 120 to 600 mm long and 70 to 200 mm wide and products up to 80 mm high, at up to 60 bags per minute, with three Panasonic servo motors, an AISI 304 stainless steel frame, a "No product, No bag" function so no film is wasted and a top sponge that reduces the air left in the bag. The range goes from the FP200BM to the FP1000BM and we build other sizes to order. For lower products at higher speed, see the FPS Flowpack.
Models: FP200BMFP400BMFP600BMFP800BMFP1000BM


bag 120–600 × 70–200 mm · product up to 80 mm high (FP600BM)
The flow pack format: one longitudinal seal and two cross seals.
The 2000 mm infeed belt, with step rollers, carries the product to the machine without damaging it; with the automatic loader (extra), the product arrives without the operator.
The reel sits on top, on a mechanically self-centring reel holder; the photocell reads the registration mark on printed film.
The film wraps around the product and forms the tube of the pillow bag.
The horizontal sealer, with its own servo motor, closes the film tube under the product.
The Box Motion jaws seal with a cross-serrated jaw and the knife cuts in a zigzag; the top sponge reduces the air in the bag and the guide brush steadies the product as it enters the jaws.
The outfeed belt, built into the frame, takes the bag on to quality control and case packing.
Tell us what you pack, in which format and at what speed. An engineer studies your case and replies with a proposal.
FP200BM · FP400BM · FP600BM · FP800BM · FP1000BM
We have received your message and will get back to you as soon as possible.
| Bag type | Pillow bag, from a reel of heat-sealable film |
|---|---|
| Bag length | 120–600 mm |
| Bag width | 70–200 mm |
| Product height | 5–80 mm |
| Speed | Up to 60 bags/min |
| Max. reel width | 600 mm |
|---|---|
| Reel holder | Mechanical self-centring, top-mounted reel |
| Registration mark reading | Photocell for printed film |
| Infeed belt | 2000 mm long, with step rollers |
| Working height | 800 mm |
| Working direction | Left to right |
| Cross sealing | Box Motion, heavy-duty jaws; cross-serrated jaw; zigzag knife |
|---|---|
| Servo motors | 3: loading zone, horizontal sealing and jaws |
| Temperature | Per-module control from the HMI screen; PID, ±0.5 °C accuracy |
| Stabilisation | Guide brush at the jaw entry |
| Air in the bag | Top sponge that reduces the air in the bag |
| Film saving | "No product, No bag" function |
| PLC | Siemens |
|---|---|
| Servo motors | Panasonic (3) |
| Sensors and photocells | Sick |
| Electrical components | Schneider |
| Relays | Omron |
| Pneumatic cylinders | SMC |
| Screen | HMI touch screen |
| Power supply | 220 V · single-phase · 50 Hz |
|---|---|
| Connected load | 6 kW |
| Construction | AISI 304 stainless steel; built-in outfeed belt; castors |
1955 mm
4939 × 1042 mm + loaderReal customer reviews from our Google Business Profile.
The machine integrates with the rest of the line: dosing, quality control and end of line.
Tell us what you pack, in which format and at what speed. An engineer will reply with a proposal.
A flow wrapper whose cross-sealing jaws move in a Box Motion: instead of rotating, they travel with the bag while they seal, so the seal lasts longer. That is why it is used for products with some height, delicate products or products that need an airtight seal.
The FP600BM runs reels up to 600 mm and makes bags 120 to 600 mm long and 70 to 200 mm wide, for products 5 to 80 mm high.
The FP600BM reaches 60 bags per minute.
For products with some height, delicate products or products that need a hermetic seal, such as burger buns and brioche, pizzas or pastries: the step rollers on the infeed belt protect the product, the guide brush steadies it as it enters the jaws and the top sponge reduces the air in the bag.
Yes. The machine has a 2000 mm infeed belt and can be fitted with an automatic loader, as an extra, that feeds the product without an operator.
Yes, with the optional inert gas injection system. An air extraction system is also available as an option, and the machine comes prepared for a printer.
The FPS reaches 80 bags per minute. The FPBM seals with Box Motion jaws, designed for products with some height, delicate products or products that need a hermetic seal.
Yes. The range goes from FP200BM to FP1000BM: the model number is the reel width in millimetres. We also adapt the machine to any other reel and product size.
The guide price starts at €78,000 (excl. VAT) for the FP600BM model. The final price depends on the model, configuration and options of your line: request a proposal and we will send you a tailored quote.
Doypack pouches with or without zipper, spout or valve, and 3-side seal sachets, sized for your packing machine.
This video is hosted on YouTube (Google). If you play it here, YouTube may store cookies and data in your browser for statistics and advertising.
We reply here from WhatsApp, usually within a few minutes.Leave us your question and we'll continue on WhatsApp.
Hi! 👋 Tell us what product you need to pack and we'll help you choose the right machine.Hi! 👋 Tell us about your production needs. Fill in the form below and send us a WhatsApp message. Our sales team will receive your enquiry and we'll reply straight away.