
Doypack with cap or spout
100–205 mm wide
Spouted doypack, the main format of this machine.
The HFX 210 CS horizontal packaging machine is designed for spouted doypacks: it forms the bag from the reel, fills it, places and seals the spout over several stations and checks every seal with a camera. Continuous motion up to 180 bags per minute, with format changes made mostly by servo motors.

Steady continuous motion for long runs of spouted doypacks.
Photocells monitor bag forming and correct the module in real time so that opening is always accurate.
Over 80% of the format change adjustment points are moved by a servo motor: shorter, repeatable changeovers.
Design with no vertical edge trim: less film is wasted on each bag.
The spout is sealed and flattened over several stations: a strong seal and a good look on the shelf.
Connected to the checkweigher, it corrects filling in real time and reduces overfilling.

100–205 mm wide
Spouted doypack, the main format of this machine.

With the doypack forming module.

Quick change between 3-side seal, 4-side seal and doypack.
Reel with automatic splicing, so there is no stop when the film is changed.
Bag forming with optical control and automatic module adjustment.
Filling from a weigher or dosing unit, with automatic weight correction.
Spout placement, then sealing and flattening over several stations.
Cameras check the spout seal and the top seal before outfeed.
| Minimum bag size | 100 × 140 × (25 × 2) mm (width × height × gusset) |
|---|---|
| Maximum bag size | 205 × 320 × (50 × 2) mm |
| Bag types | Spouted doypack, doypack, 3- and 4-side seal |
| Products | Solids, liquids, solid + liquid and powder |
| Speed | 150–180 bags/min (depending on product) |
|---|---|
| Motion type | Continuous |
| Format change | Over 80% of adjustments made by servo motor |
| Power supply | AC 380 V · 50/60 Hz |
|---|---|
| Power | 15 kW |
| Air consumption | 0.6–1.5 m³/min |
| Noise level | < 80 dB |
| Dimensions | 15,056 × 2,035 × 2,350 mm (length × width × height) |
|---|---|
| Net weight | 14,000 kg |
Connected to the checkweigher, it adjusts filling in real time and reduces product giveaway.
Quick hopper connection: changing between products takes less time.
Surfaces with no exposed screws or air tubes and fewer corners where dirt can build up: easier to clean.
Reinforced sealing and flattening for a strong seal and a shelf-ready finish.
Places and seals the cap or spout on the machine itself; a simple module to operate.
Switches quickly between 3-side seal, 4-side seal and doypack bags on the same machine.
Changes the reel while the machine is running: production does not stop when the film runs out.
The cameras check the spout seal and the top seal in real time.
The machine integrates with the rest of the line: dosing, quality control and end of line.
For products in spouted doypacks: purées and compotes, sauces, drinks, gels, detergents and other liquids or semi-liquids, as well as solids and powder.
Between 150 and 180 bags per minute in continuous motion, depending on the product and the bag size.
Cameras check the spout seal and the top seal of every bag in real time.
Yes. With the doypack forming module it switches quickly between doypack, 3-side seal and 4-side seal.
The HF also makes spouted bags, at a lower speed (HF 220: 40–70 bags/min).
Tell us what you pack, in which format and at what speed. An engineer will reply with a proposal.
Models of the same family and their counterpart in the other range.



We reply here from WhatsApp, usually within a few minutes.
Hi! 👋 Tell us what product you need to pack and we'll help you choose the right machine.