Automatic Carton Sealer
Learn more
End of Line Accessories
Semi-automatic case sealer
The semi-automatic case sealer is an effective, simple solution for closing cases in production environments: the operator folds the flaps and pushes the case, and the side belts drive it under the double cassette, which tapes it top and bottom. Height-adjustable for different case sizes, it handles cases 200 to 600 mm long at up to 25 cases per minute and weighs only 150 kg.
- cases/min
- 0–25
- case length
- 200–600 mm
- tape width
- 48 mm
- weight
- 150 kg
Why choose it
01
Simple, precise operation
The operator folds the flaps and pushes the case; the machine drives it with its side belts and tapes it on its own.
02
Double cassette as standard
Housing for two cassettes, top and bottom, to tape the case top and bottom in a single pass.
03
Height-adjustable
Adjusts to different case sizes: 200 to 600 mm long, 150 to 500 mm wide and 150 to 500 mm high.
04
Light and easy to position
150 kg, oven-painted steel frame and height-adjustable castors with brakes, so it can be moved and levelled.
05
Built-in safety
Blade with safety devices to prevent accidents, plus an optional safety guard.
In action
How it works
Preparation
The operator folds the flaps of the filled case and places it on the idle roller bed.
Drive
The side drive belts carry the case through the machine.
Taping
The double cassette applies the 48 mm tape top and bottom and the guarded blade cuts it.
Outfeed
The sealed case leaves over the rollers towards palletising.
Technical specifications
Capacity
| Speed | 0–25 cases/min, depending on case type and operator skill |
|---|---|
| Case dimensions | 200–600 mm length × 150–500 mm width × 150–500 mm height |
| Tape width | 48 mm (other widths optional) |
| Cassettes | Double cassette as standard, top and bottom |
Construction
| Frame | Oven-painted steel |
|---|---|
| Adjustment | Height-adjustable for different case sizes |
| Case transport | Idle roller bed and side drive belts |
| Castors | With brakes, height-adjustable |
| Machine dimensions | 1770 × 850 × 1520 mm |
| Weight | 150 kg |
Components
| Motors | Alren or similar |
|---|---|
| Bearings | NSK |
| Blade | SKD11, with safety devices |
| Contactors | Schneider or Moeller |
| Pneumatics | Airtac or SMC |
Power
| Power supply | 220/380 V, 50 Hz |
|---|---|
| Power | 400 W |
Options and extras
Complete line
The machine integrates with the rest of the line: dosing, quality control and end of line.
- Weight controlCheckweigher
- Case erectingF2 case erector
- Case packingCase packing and palletising
- This machineSemi-automatic case sealer
Frequently asked questions
What does the operator do and what does the machine do?
The operator folds the flaps and pushes the case. The machine drives it with the side belts and tapes it top and bottom with the double cassette.
What case sizes does it handle?
Cases 200 to 600 mm long, 150 to 500 mm wide and 150 to 500 mm high. The machine is height-adjusted for each size.
What speed does it reach?
Up to 25 cases per minute. The actual figure depends on the case type and the operator's skill.
How does it differ from the automatic case sealer?
The automatic model folds the flaps with a pneumatic piston with no operator intervention and weighs 250 kg. The semi-automatic model weighs 150 kg and the folding is done by the operator.
What extras are available?
Tape break and tape level sensors, other tape widths, stainless steel frame finish and a safety guard.
Is this the right machine for your product?
Tell us what you pack, in which format and at what speed. An engineer will reply with a proposal.
- Installation and commissioning
- Operator training
- Remote support
- Spare parts and maintenance
You may also be interested in